拉深筋反求优化方法研究-材料加工工程专业论文.docxVIP

燕山大学工学硕士学位论文Abstract 燕山大学工学硕士学位论文 Abstract As one of important measure taken to control the sheet forming， Drawbead is used widely in industry，due to simple configuration and used convenience．but there is not a fast and effectual mehod to design drawbead。 because of complexity of drawbead mechancis characters and influence in sheet forming．Furthermore，because shorten product empolder periods and reduce empoldered cost become mostly measure to compete，the design of drawbead is more attented by people． In this paper，the optimization design rule of drawbead which is based on force and based on forming waS put forward，and corresponding optimization mathematical model of drawbead was established，based on previous research about the principle of deformation features and mechanical characters，and analysis about composing characters of drawbead force and It’s influence principle to subsequent forming of sheet metal． In this paper，drawbead converse optimization arithmetic，DDCOP arithmetic，was put forward，based on the research and contrast of optimization arithmetic，the analysis of influencing factor of drawbead energetic parameters and the fact of finite element simulation．DDCOP arithmetic realizes successfully converse design of drawbead，in the method of combining restraint variable—metric method and quasi—discrete method．DDCOP arithmetic haS upper calculated capacity and stability Base on the above research，drawbead converse optimization design system was empolder which based on finite element simulation，making used of secondary empoldered technology of《Marc))software，through programming in Python．In this paper,corresponding experiment Was made to prove the result of circle drawbead converse optimization reliability． Keywords Sheet forming；Drawbead；Die；Optimization；Converse design Ⅱ 燕山大学硕士学位论文原创性声明本人郑重声明：此处所提交的硕士学位论文《拉深筋反求优化方法研 燕山大学硕士学位论文原创性声明 本人郑重声明：此处所提交的硕士学位论文《拉深筋反求优化方法研 究》，是本人在导师指导下，在燕山大学攻读硕士学位期间独立进行研究工 作所取得的成果。据本人所知，论文中除已注明部分外不包含他人已发表 或撰写过的研究成果。对本文的研究工作做出重要贡献的个人和集体，均