框架植筋节点的抗震性能试验研究与有限元分析-结构工程专业论文.docxVIP

  • 2
  • 0
  • 约4.65万字
  • 约 61页
  • 2019-05-26 发布于上海
  • 举报

框架植筋节点的抗震性能试验研究与有限元分析-结构工程专业论文.docx

框架植筋节点的抗震性能试验研究与分析摘要 框架植筋节点的抗震性能试验研究与分析 摘要 植筋技术是一种新的钢筋锚固技术,在解决新老混凝土连接、钢筋漏 埋错埋等钢筋生根问题中发挥着重要作用,被广泛应用于与结构加固改造 中。但植筋锚固与常规的钢筋锚固有很大的不同,至今还没有成熟的相应 规范。虽然国内外有大量这方面的试验研究,也获褥了丰富的硒究成果, 但主要集中在静力研究上,对于模拟地震动力的试验研究很少,对其抗震 性能知之甚少。 本文对植筋胶的锚固性能进行了深入的理论分析,研究了植筋在拉拔 力作用下的破坏性态和破坏机理。通过对一个整浇钢筋混凝土节点和三个 具有不同植筋深度的化学植筋节点进行低周反复荷载试验,验证植筋系统 用于抗震加固的可行性。 复杂的结构工程课题的有限元计算模型,有时是比较复杂的,往往需 要采用不同的单元形式构成一个混合的计算模型。本文采用钢筋等效法来 模拟植筋构件以建立起有限元模型,利用ANSYS对其计算分析,对实验 结果进行分析比较。 关键词:化学植筋:低周反复荷载;抗震性能:植筋深度;承载力; 有限元;ANSYS Experimental Experimental Study and FEA of the Seismic Behaviour for Chemically Planted-bar Joints ABSTRACT Adhesively bonded bars are a new technique of bars anchorage.It has been widely used in rehabilitation,renovationand repairs ofconcrete structures,as it is easy toanchor steel to concrete.But the bond behavior of adhesively bonded bar iS greatly di腑rent矗om that of ordinary bars in concrete.No analysis methods for adhesivily bonded bars are presented in concrete structure code.Alth01=l咖theTe are plenly of experiment and study about this field,but they are mainly about static study.There iS feW experiments and study about anti—seismic.SO we kown little about the seismic behaviour of chemically planted—bar. 112 this paper,capacity of bonded bar has been deeply studied in theory and the mechanism and failure mode of adhesively bonded bars in concrete subjected to tension have been invesigated.On t11e foundation of experiment about one RC joint and three planted—barjoints with different planted depth,point out that it is feasible by using chemically plated bar in aseismatic Strtlcture. Sometimes the finite element model of a complicated structure engineering problem iS conesponding complicated because many kinds of difrerent elements being used in the model and several kinds of elements composed a mixed analysis model.In tlle paper,on the basis of the theory that the volume of the steel bars equal to the steel slab,the analysis model is composed.It is soluted with ANSYS and analysed against the concl

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档