使用超级终端抓MG3000-R32的sip协议trace方法.docVIP

使用超级终端抓MG3000-R32的sip消息trace设置方法 使用超级终端工具，telnet MG3000-R32的IP地址 端口100，出现如下图，然后 选中（工具），里面有捕获文字，点确定后选一个文件存放位置 ================================================================ ================================================================ ========== ========== ========== VOIP GATEWAY ========== ========== ========== ========== V 1.5.1 ========== ========== ========== ========== All Rights Reserved ========== ========== ========== ================================================================ ================================================================ Login: user Password: （密码不显示，实际为user） ----------- Welcome to Use VOIP GATEWAY ----------- VOIP GATEWAY:c t The command has been completed successfully! VOIP GATEWAY:\manage\tracert The command has been completed successfully! VOIP GATEWAY:\manage\tracest Please input module ID 0--all module 1--ether 2--DSP 3--slic 4--trap 5--console 6--telnet console 7--web console 10--SNMP 11--manage 12--SIP protocol 13--SIP application : 11 Please input port ID(0-32): 0 Please input trace type 1--entry 2--return 3--thread 4--pipe 5--SEM 6--MSG 7--timer 8--memory 9--normal 10--ACK 11--all : 11 Please input trace level(1-5): 4 Please input trace output mode(1--console 2--buffer): 1 Please input console input mode(1--real time 2--task): 1 The command has been completed successfully! VOIP GATEWAY:\manage\tracest Please input module ID 0--all module 1--ether 2--DSP 3--slic 4--trap 5-