新立新龙激光雕刻iqcnc.doc

Manual of Newlydraw1 1 Interface operation Inferface Components The follwing picture is the initial screen of the program. Most functions of the program can be found in the menu bar, tool bar and attribute bar. The functions only use the keyboard can be introduced in the following sections. The tool icon name is displayed when the pointing device moves over the tool icon. Predefined layout is displayed when the pointing device moves over “A4” pull-down box. The property bar can be changed to another mode according to your selection. Predefined layout: You can select a predefined layout in the pull-down box and the width and height of the layout is changed to specified dimension. You can input the width and height directly if you select “user” in the pull-down box. Orientation: This software offers portrait and landscape for changing the layout orientation. Width, Height: The width and height of current layout. Length measurement units: Such as mm, point and inch. If you change the measurement units, the value of width and height will be changed at same time. 2 Import This program can import DXF, PLT, BMP, JPG files. Click the import button from the toolbar or choose Import from File menu. The file selction dialog box displays. Select a file to import. Handles: There are eight handles on the object. Modification: By holding down the pick button on the pointing device and drag the mouse, you can modify the size of this object. And you can press trl if you do not change the scale between the width and height. Combined objects attribute bar: Center coordinates: The coordinates of the center of the combined object. They can be modified. Dimension: The width and height of the combined object. They can be modified. Engrave mode: cut. 3 Drawing a. Line Drawing: Click the line icon on the toolbar and hold down the pick button on the pointing device at the first point of the line and drag to the second point of the line, then release the pick button.