数字温度计设计与仿真.pdfVIP

基于 AT89C51 的数字温度计设计与仿真 摘 要 随着科学技术的不断发展，温度的检测、控制应用于许多行业，数字温度计就 是其中一例，它的反应速度快、操作简单，对环境要求不高，因此得到广泛的应用。 传统的温度测量大多使用热敏电阻，但热敏电阻的可靠性差，测量温度准确率 低，而且必须经过专门的接口电路将模拟信号转换成数字信号才能由单片机进行处 理。本课题采用单片机作为主控芯片，利用 DS18B20来实现测温，用 LCD液晶显示 器来实现温度显示。 温度测量范围为 0～ 119℃，精确度 0.1 ℃。可以手动设置温度上下限报警值， 当温度超出所设报警值时将发出报警鸣叫声，并显示温度值，该温度计适用于人们 的日常生活和工、农业生产领域。 关键词 ：数字温度计； DS18B20；AT89C51；LCD1602 Digital Thermometers Design and Simulation Based on AT89C51 Deng Lian Wei (Zhangjiajie College of Jishou University,Zhangjiajie,Hunan 427000) Abstract With the continuous development of science and technology, the temperature detection and control used in many industries, the digital thermometer is a case in which the reaction speed, simple operation, less demanding on the environment, it is widely used. Most of the traditional use of thermistor temperature measurement, but poor reliability of thermistors to measuretemperature, low accuracy, and must go through a special interface circuit converts the analog signal to digital signal processing by the microcontroller. The subject of using SCM as the main chip, the use of DS18B20 to achieve temperature, with the LCD liquid crystal display to achieve the temperature display. Temperature measurement range is 0 ~ 119℃, accuracy of 0.1 ℃. You can manually set the alarm value upper and lower temperature, when the temperature exceeds I the set alarm when the alarm calls, and display temperature, the thermometer for peoples daily lives and industrial and agricultural production areas. Keywords:Digital Thermometer; DS18B20; AT89C51; LCD1602 目 录