广东海洋大学教师论文被SCI-Expanded收录情况统计-2009.docVIP

广东海洋大学教师论文被 SCI-Expanded 收录情况统计-2008 检索数据库： Engineering Village 2 检索年代： 2008年 检索策略： Author Affiliation: zhanjiang ocean univ or zhanjiang ocean university or guangdong ocean univ or guangdong ocean university 检索日期： 2011 年 12 月 12 日 检中条数： 89 条 RECORD 1 Mechanical analysis of cylinders being upset between spherical concave platen and concave supporting plate Liu, Guohui1; Xiao, Wenhui2; Ni, Liyong3; Liu, Zhubai1 Source: Chinese Journal of Mechanical Engineering (English Edition), v 21, n 3, p 99-102, June 2008 ; ISSN: DOI: 10.3901/CJME.2008.03.099; Publisher: Chinese Mechanical Engineering SocietyAuthor affiliation: 1 College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China2 College of Material Science and Engineering, Yanshan University, Qinhuangdao 066004, China3 College of Engineering, Guangdong Ocean University, Zhanjiang 524088, China Abstract: Mechanical analysis of cylinders being upset between spherical concave platen and concave supporting plate is conducted. Rigid-plastic mechanical models for cylinders are presented. When the ratio of height to diameter, is larger than 1, there exists two-dimensional tensile stress in the deformed body, when the ratio is smaller than 1, there exists shear stress in static hydraulic zone. The former breaks through the theory that there is three-dimensional compressive stress irrespective of any ratio of height to diameter. The latter satisfactorily explains the mechanism of layer-like cracks in disk-shaped forgings and the flanges of forged gear axles. The representation of the two models makes the upsetting theory into correct and perfect stage. (4 refs.)Main Heading: StressesControlled terms: Cylinders (shapes) - Plates (structural components) - Tensile stress - Three dimensional - Two dimensional - Upsetting (forming)Uncontrolled terms: Forged gear - Mechanical analysis - Mechanical modelling - Spherical(pivot) - Three dimensional (3D) - Two-dimensional (2D)Classification Code: