FANUC系统的11种孔加工固定循环指令.docxVIP

FANUC系统的11种孔加工固定循环指令 11 hole process!ng fixed cycle instructions in FANUC system FANUC system has 11 kinds of hole processing, fixed cycle instructions, and some of the instructions are introduced below. drilling cycle instruction G81 G81 drilling cycle instruction format for: G81 G X Y Z R F Delta X, Y for hole position, Z for hole depth, F for feed speed (mm/min), and R for reference plane height? G delta can be G98 and G99, G98 and G99 two modes of instruction control hole machining cycle after the end of the tool is to return to the initial plane or reference plane; G98 returns the origin