基于MATLAB的MPSK性能分析课件.docVIP

基于 MATLAB的 MPSK性能分析 【摘 要】 通信系统中的数字调制技术是通信与信息系统领域的基础知识，而相移键 控(MPSK)信号是作为常见的数字通信调制信号。目前，它已被广泛应用，不管是在传统的 通信系统，还是移动通信系统或卫星通信系统。这些都是因为它的功率和频谱效率高的优 点。因此对相移键控信号的调制解调原理的掌握有助于加深对调制技术的理解，并对深入 学习新型的调制技术有指导作用。本文首先介绍数字通信系统的组成，然后分析数字调制 系统中的几种基本调制解调方法，主要包括 MPSK和 MDPS。K最后运用 MATLAB软件对 MPSK 和 MDPSK进行仿真和分析，其中主要是通过仿真得到信噪比与误码率之间的曲线，然后对 加性高斯白噪声环境下的性能进行分析，并与理论值相比较。最后，还对 MPSK与 MDPSK 在实际情况下的误码率进行了比较和分析。 【关键词】 数字调制， MPS，K MDPS，K误码率，信噪比 基于 MA TLAB 的 MPSK 性能分析 MPSK Performance Analysis Based On MATLAB 【Abstract】 Digital modulation technology in communication system is basic knowledge in the field of communication and information systems, and phase-shift keying (MPSK) signals are as common digital modulation signals. Due to its high power and spectrum utilization, MPSK have been widely used in traditional communications, mobile communications and satellite communications systems. Grasp of the phase-shift keying signal modulation and demodulation principle will help to deepen the understanding of modulation techniques, and it play a guiding role in-depth study of a new type of modulation technique. This paper first describes the composition of the digital communication system, and then analyzes several basic digital modulation systems, mainly includes MPSK and MDPSK. At last, using the MATLAB software to simulate and analyze the MPSK and MDPSK. Through the simulation, we get the curve between signal-to-noise ratio and the error rate. Then analyzes the performance under the Gaussian white noise environment, and compares with the theory. Finally, also has carried on the comparison and the analysis to MPSK and MDPSK in the actual situation error rate. 【Key words】 Digital modulation, MPSK, MDPSK, error rate, signal-to-noise ratio II 基于 MA TLAB 的 MPSK 性能分析 目 录 第一章 绪论. ................................................................ 1 1.1 课题背景 .............................................................. 1 1.2 调制技术的发展和趋势 .................................................. 1 1.3 课题研究的意义 ...............