em2001易速达汽车引擎强化加速晶片.docVIP

EM-2001易速達汽車引擎強化加速晶片 e-Star Automobile Engine Reinforcing Accelerate Chips (Model No.: EM-2001) 理論基礎： 本產品之理論基礎是利用二價、三價鐵（Fe＋2、Fe＋3）材料，受到天然能量的波場引響，該鐵原子的核旋轉和電子旋轉就發生變化，成為所謂激發狀態（Excited state），而具有高階能量。此高階能量能持續10年以上產生每秒一千億次之自然震盪波，藉本晶片的整流共振作用，而有效地將空氣中的氫氧分子迅速活化、微細化，使其瞬間成為類離子狀態。當活化後的空氣進入引擎燃燒室時，對燃油分子的承載量可以達到16倍以上，並使油氣混合比達到1：14.5之最佳比例。經檢驗測試，「e-star引擎強化晶片」能有效使燃油達到完全燃燒，並提昇引擎效率達10~20%。 Rationale: Rationale of the product is to provide iron atoms with high-order energy by changing their nuclear and electron spins in a so-called “excited state” when divalent and trivalent irons (Fe＋2、Fe＋3) are affected by the wave zone of natural energy. Such high-order energy can consistently generate one hundred billion natural oscillation waves per second for more than ten years to effectively activate and micronize the hydroxide molecules in the air to be in an ion-like status instantaneously by means of the chip’s rectification and resonance. Then, when the activated air enters the combustor, the load-carrying capacity of fuel molecules can be increased more than 16 times to reach the optimal fuel-air mixture ratio of 1:14.5. Through many tests and inspections, “e-star Automobile Engine Reinforcing Chip” has been proven to be able to help achieving total fuel combustion and improving engine efficiency by some 10~20%. 安裝方法： 將空氣濾清器之螺絲或金屬簧夾鬆開，再將上蓋打開，取出空氣濾蕊。（如圖一） 將「e-star引擎強化晶片」平均鋪於濾蕊上方。（如圖二） 以附件卡夾插入「e-star引擎強化晶片」兩對角洞口。（如圖三） 4.將卡夾按下連結空氣濾蕊，使「e-star引擎強化晶片」不致鬆脫即可，再將空氣濾蕊鎖回濾清器。（如圖四） Installation: Loosen the screws or metal clips on the air filter to open the top cover before taking the air filter cartridge out (as shown in Fig 1). Place “e-star Automobile Engine Reinforcing Chips” evenly on the filter cartridge (as shown in Fig 2). Insert the attached jump rings into the two diagonal holes on the “e-star Automobile Engine Reinforcing Chips” (as shown in Fig 3). Press the jump rings to connect with the air filter cartridge and ensure that the “e-star Automobile Engine Reinforcing Chips” will not fall