DECKELFP4CC数控铣Z轴伺服驱动技术改造.docxVIP

DECKEL—FP4CC数控铳Z轴伺服驱动技术改 摘要：DECKEL-FP4CC数控铳是90年代生产的设 备，由于Z轴伺服电机故障而无法使用，且同型号电机已不 生产，经多个方案比较，以松下伺服驱动系统替代原Z轴伺 服系统，改造后机床运行良好，为老机床解决相似故障提供 一种借鉴和思路。 Abstract: DECKEL-FP4CC NC milling machine is produced in 90， s, which could not operate because of the fault of Z axis servo motor, and same type motor had no production, so the Panasonic servo drive system substitute for Z axis servo system, and after the transformation, the machine runs well, providing a useful reference for the old machine tool to solve the similar fault? 关键词：DECKEL-FP4CC数控铳；松下伺服驱动系统替 代；技术改造 Key words : DECKEL-FP4CC NC milling machi