A型门锁板冲压设计.docVIP

摘要 全套设计包括设计说明书+CAD图纸。购买请联系qq：541937254 PAGE IV PAGE 4 A型门锁板冲压工艺分析及模具设计 摘 要 本次设计了一套冲孔、落料的模具。经过查阅资料，首先要对零件进行工艺分析，经过工艺分析和对比，采用冲孔落料工序，通过冲裁力、顶件力、卸料力等计算，确定压力机的型号。再分析对冲压件加工的模具适用类型选择所需设计的模具。得出将设计的模具类型后将模具的各工作零部件设计过程表达出来。  在文档中第一部分，主要叙述了冲压模具的发展状况，说明了冲压模具的重要性与本次设计的意义，接着是对冲压件的工艺分析，完成了工艺方案的确定。第二部分，对零件排样图的设计，完成了材料利用率的计算。再进行冲裁工艺力的计算和冲裁模工作部分的设计计算，对选择冲压设备提供依据。最后对主要零部件的设计和标准件的选择，为本次设计模具的绘制和模具的成形提供依据，以及为装配图各尺寸提供依据。通过前面的设计方案画出模具各零件图和装配图。  本次设计阐述了冲压倒装复合模的结构设计及工作过程。本模具性能可靠，运行平稳，提高了产品质量和生产效率，降低劳动强度和生产成本。 关键词：落料冲孔，复合模，凸凹模间隙 Type A Door Lock Plate Stamping Process Analysis And Die Design ABSTRACT  The design of a set of punching, blanking the die. After the data access, we must first carry out parts of the analysis, a technology analysis and comparison, the use of punch-and-blank process, by punching, and pieces of the roof, unloading and so on, the press identified the models. Further analysis of press parts for processing Die select the type of application design mold. That will design the type of mold will die of the working parts of the design process expression. In the first part of the document, describes the main stamping dies of development, explains the importance of stamping die and the significance of this design, and then stamping on the pieces of analysis, complet the process for the identification. The second part, the part of the design layout plans, complet the utilization of the calculation. Again blanking the process of calculating and Die part of the design work, the stamping equipment to provide the basis for selection. Finally, the main components of the design and the choice of standard parts, base on the design of the mould and die mapping provide the basis for the forming and assembly plans to provide the basis for all sizes. Through the front of the design plan to draw maps and parts of the mold assembly. The designs on the flip of stamping die design and the structure of the working process. The mold of reliable, smooth operation, improved product