KF-25分体壁挂空调器的设计及三维模拟.docVIP

KF-25分体壁挂空调器的设计及三维模拟 KF-25 分体壁挂空调器的设计及三维模拟 摘要 我国是家用空调生产和使用大国作为家用空调的主体分体壁挂式空调有其 明显的优势使得它在未来不算短的时间内依然是家用空调的主体分体壁挂式空调 以其独特的结构特点和优越的性能而被广泛应用它采用的是压缩制冷的方式主 要分为两部分即室内机组和室外机组其室外机组主要由制冷压缩机冷凝器和 轴流风机组成室内部分主要由蒸发器和贯流式风机组成两者之间用连接管道相 连构成一个完整的空调机组本文对分体壁挂式空调器进行概述并设计一个采 用R22制冷剂的KF-25型空调主要对制冷系统进行了设计计算包括压缩机的选型 蒸发器及冷凝器的设计计算并对其室外机进行三维模拟最后对空调器的整体结 构进行设计得到室内机尺寸为900mm × 200mm × 270mm 室外机的尺寸为 × 840mm × 320mm 420mm 该空调器的COP值为255 关键词分体壁挂式空调设计三维模拟 - I KF-25 分体壁挂空调器的设计及三维模拟 Abstract In China domestic air-conditioner was far-range used Being the main part of the home air-condition the split room air-condition has obvious advantage to make it still the main part of the home air-condition in future not for a short timeWall-mount split type air conditioner is applied widespread for special structure and superior function The wall-mount split type air conditioner is compression refrigeration it is made up of two parts the indoor unit and the outdoor unit Outdoor unit is made of a refrigeration compressor a condenser and an axial flow fan the indoor unit is made up of evaporator and cross flow fan The piping links the indoor unit and the outdoor unit which became an integrated air condition machine set The wall-mount split type air conditioner is summarized in the whole structure and an air conditioner KF-25 of using R22 as refrigerant is designed in this paper Including choose the type of compressor the design calculation of evaporator and condenserAnd the outdoor unit to its 3-D Modeling ．In the end when designing the whole structure of air conditioner air conditioners indoor machine size is 900mm×200mm×270mm and its outdoor machines size is 840mm×320mm×460mmT