北京市某高校博士生公寓楼设计毕业设计说明书.docVIP

北京市某高校博士生公寓楼设计毕业设计说明书 毕业设计说明书 题目:北京市某高校博士生公寓楼设计 毕业设计(论文)中文摘要 北京市某高校博士生公寓楼设计 摘要: 我的毕业设计名称为北京市某高校博士生公寓楼设计,该博士生公寓楼的主体结构是为八层结构,结构的形式为全现浇钢筋混凝土框架结构,该结构层高为:首层3.9米,其余各层层高3.3米;顶层电梯机房为2.7米。建筑室内外高的差为450mm,女儿墙高度1500mm,建筑高度27.45m,建筑耐火等级为二级;公寓楼建筑面积为6439.5平方米,全现浇钢筋混凝土框架结构,结构设计使用年限为50年。 该公寓在设计时充分考虑了北京的地理特性,在建筑图设计时,考虑抗震设计规范的要求,满足结构稳定性,抗震条件,以及使用性的规定。结构设计时充分验算结构的轴压比,剪跨比,周期比,以及位移比是否满足规范要求,在设计时运用PKPM(2010)以及探索者等软件,使结构计算更加准确,使绘制施工图更的加方便不易出错。只有对结构充分的考虑分析,才能使自己的设计更加符合规范,更加满足使用要求。 关键词:公寓楼设计 框架结构 建筑设计 结构设计PKPM电算 毕业设计(论文)外文摘要 Title Design for a Doctoral student Apartment buildingof University in beijing Abstract This building is located in a university of Beijing, between the canteen and office building, on the north side of the building. It has an eight-layer main structure , the structure form is reinforced concrete structure, the height: the first layer of 3.9 meters, other layer’s height of 3.3 meters; Elevation difference of inside and outside of 450 mm, parapet height of 1500 mm, building height of 27.45 m, building fire resistance rating for level 2; Apartment block’s floorage of 6439.5 square meters which have independent toilet, the balcony, the cast-in-situ reinforced concrete frame structure, the structure design’s survive year for 50 yearsThe apartment is fully taken into account in the design of Beijings geographic features, designed the building plans, consider seismic design code requirements, meet the structural stability, seismic conditions, and usability requirements. Structural design fully checking axial compression ratio, shear span ratio, cycle ratio and displacement ratio meets the specification requirements in the design when using PKPM 2010 as well as explorers and other software, make structural calculations more accurate, so that construction plans drawn plus more convenient less error-prone. Only full consideration of structural analysis in order to make their design more compliant, and more to meet the requirements. Keyw