罗格朗智能家居环境控制系统培训之安防报警篇.ppt

* * System limits of the base system System limits are divided in terms of distance and absorption in physical limit and in terms of addresses in logical limit. * * * * * To calculate the absorption of the Alarm System too, you have to consider the table of absorptions. * * * * * Detectors (Max 9 detectors in each zone) Perimeter detection CONTACT INTERFACE MODULE: - L/N/NT4612, A/AM5792: NC electromagnetic contact interface module – can connect balanced and unbalanced contact protection lines – alarm indication LED with operation memory – auxiliary pre-alarm channel can be activated. - A/AM5792: interface module for cable detector to protect shutter – can be applied to NC/NO and window-breaking detectors. - 3480/F482: interface to connect a tamper protection line and two F482 independent contact lines, can be balanced with resistance and operation can be delayed. Made in 2 DIN mod. container (F482) and Basic (3480) can be used as an alternative to L/N/NT4612 and A/AM5792 for centralizations in panels or junction boxes MAGNETIC CONTACTS Item MAGNETIC CONTACTS IR BARRIERS: to protect windows and doors. The device is made up of 2 columns, one acts as TRANSMITTER (TX), the other as RECEIVER (RX). When several IR beams are interrupted, the alarm is immediately triggered. CABLE SENSOR FOR ROLLING SHUTTERS WITH WIRE CONNECTION. Volumetric detection PASSIVE IR DETECTOR: - L/N/NT4610: Volumetric presence detector with passive infrared rays – alarm signal LED with memory – range 8 metres, angular opening 105°, 14 beams divided over 3 levels – auxiliary pre-alarm channel can be activated. - L/N/NT4611: Volumetric presence detector as above – angular opening can be divided from 105° to 0°– swivel lens on 2 axes. PASSIVE IR MINI-DETECTORS (N4640): volumetric presence detector with passive IR – alarm signal LED with memory – range 8 metres, angular opening 105°, 14 beams divided over 3 levels – auxiliary pre-alarm channel can be activated – wall, inclined and at an angl