罗格朗智能家居环境控制系统培训温度控制篇.ppt

* The relay that controls the pump is only in zone 00. OFF= excludes the relay functionality. * ZB1=ZB2 and N1=N2 the load is an Open/Close solenoid valve. OFF= excludes the relay functionality. * ZB(x)=ZB(x+1) and N1=N2 the load is an Open/Close solenoid valve. OFF= excludes the relay functionality. * * * Absorption : 1200mA (1000mA with 127V power supply) available from the power supply. Distances : 500m MAX of total cable, 250m MAX the length of the connection between power supply and farthest device. * Physical limit 250m MAX between the power supply and the farthest actuator 500m MAX of stretched cable * Physical limit – Absorption We have 1200 mA available from the power supply, that cannot be exceeded. When you plan the system, you have to control the table of absorptions. To find the total absorption of the system, you have to make the sum of the absorptions of all your devices. If the Temperature Control System is built with an Automation System, the absorption of ALL the products has to be taken into consideration. * Logical limit You can have up to 99 zones (ZA, ZB), each zone can have up to 9 loads connected (N = always progressive: 1,2,3…. up to 9). * * For the splitters it is possible to manage only the ON/OFF function but not the SPEED control (only with its own IR command). * * Composition of the Thermo Regulation System HYDRAULIC CIRCUIT LOADS (valves or pumps) CENTRAL UNIT PROBES ACTUATORS ACCESSORIES * * Central Unit 573918/9 This permits to configure the system, to personalize the programs and show/visualize the information. The central unit can provide both heating and cooling and can manage up to 99 different zones (it is like having 99 room thermostats in a single device). The temperature control unit allows quick programming thanks to its large display, navigation of the simplified menu and keypad like that of a mobile phone. 573918/9: Control unit to manage the Temperature Control System 067516: 6V battery 0.5Ah for the temp