解决饲料制粒调质问题的整体方案.pptVIP

挤压稳定之－－三辊/两辊区别 压辊外径：两辊＞三辊，好比车轮，吉普车轮肯定比跑车轮胎要大，抓地力大。 压辊角速度：两辊＜三辊，物料受压更密实，压辊挤压受力更稳定。 挤压区间：两辊＞三辊，物料受压更密实。 模、辊渐开线角：两辊＜三辊，物料压入更均匀。 挤压稳定之－－挤压系统改进 杜绝中轴系统的任何晃动，确保挤压系统的稳定。 两个均匀之－－控制进料及分料 料层分布均匀 两个均匀之－－喂料控制 强制匀料板，与环模之间间隙可调节。能有效控制左压辊的进料量。 人字型压辊能有效控制物料在挤压区域的流动。 人字型辊齿能较好避免虾料生产时压辊的常见磨损。 特殊齿型设计，避免辊齿间积料； 上喂料刀能有效控制右压辊进料。 料层分布均匀 两个均匀之－－喂料控制2 料层分布均匀 两个均匀之－－切刀切削均匀 切刀固定与门盖分离； 切刀与环模外圆可以紧密配合； 切刀磨损良好，不需要频繁更换 虾料专用的环模，特殊排列，可以有效解决切刀的磨损问题，保证切削效果更好。 单击此处编辑母版文本样式 第二级 第三级 第四级 第五级 放映结束 感谢各位的批评指导！ 让我们共同进步 * What is steam? If we are to generate steam we must obviously heat the water to boiling point (100 篊 at Atmospheric pressure). The heat energy given to the water is known as the specific enthalpy (or liquid enthalpy) and referred to as hf and is measured in kJ/kg. To change the water to steam at 100 篊 we have to introduce more heat energy to it. This heat energy is known as the specific enthalpy of evaporation and is referred to as hfg. (kJ/kg). The total energy in the steam thus produced is the addition of hf + hfg and is referred to as total enthalpy (hg). ( kJ/kg). When the steam transfers its heat to whatever process it is applied, it is the enthalpy of evaporation which is transferred first and the steam thus condenses back into water at the same temperature. Steam at atmospheric pressure is of a limited practical use because of course it cannot be conveyed under its own pressure along a steam pipe to its point of use. Thus for practical applications it has to be generated in a boiler (steam generation plant) at a pressure which corresponds to the purpose for which it will be used. It has to be understood therefore that if water is kept at a pressure above atmospheric, its temperature must be raised above 100 篊 before boiling will take place. At 10 Bar (gauge) for example, boiling point is 184.13 篊 So it follows that more heat energy has to be put into the water to raise its temperature to boiling point at 10 bar g than would be needed to raise its temperature to 100 篊 (0 bar g) bu