Gsm信令消息详解-Update.ppt

External Inter Cell切换过程——异步切换（六） Cell identifier serving和cell identifier target 采用LAC＋CI来标识 Priority PVI Queuing allowed indicator PCI Circuit identifier code Handover cause 谢 谢 * * Introduction : This document cant describe all the GSM, but some specific cases have been selected. This docuement can be completed within the time. Contents : Split the different phase of a call into small module (RL Est, Normal Ass Proc, HO proc, Release) In case of failure, the link to the different release is made * OSI : Open System Interconnection SCCP : Signalling Connection Control Part (OSI Layer 3 complementary Software in SS7 code, used to manage signalling channel without associated speech channel) MTP : Message Transfert Part DTAP : Direct Transfert Application Part (BSC - MS transfert protocol) MAP : Mobile Application Part (Protocol Used between NSS Machine) TCAP : Transaction Capabilities Application Part (Layer 7 sub-set in CCITT n°7 signalling system) * RR Management : functions related to the management of the common transmission resources. Functions can establish, maintain or release RR connections. RR includes the reception of BCCH and CCH when no RR connection is established. Paging Procedure : Network inform that a MS is called Random Access Procedure : Method by which the MS requests Air Interface Resource from the network Immediate Assignment Procedure : BSS allocates a resource to the MS and the MS Network establish a radio signalling link between themseleves. This procedure is carried out automatically by the BSC without informing the MSC SCCP : Signaling Connection Control Part SCCP Connection Establishment Procedure : When Air interface signalling connection is succesfully established, the MSC is informed of the presence of the mobile by the use of SCCP * Channel Request （在RACH上发送） 主要内容： 1.包含各种试呼原因：Emergency call, Call re-establishment, Answer to paging, OC，sms and LU. 2.随机接入号码（random access number） Channel Required : 1.包含各种试呼原因 2. Random