送料小车控制系统的PLC设计.docVIP

送料小车控制系统的PLC设计 作者姓名： 专业名称：电气工程及其自动化 指导教师： 副教授 送料小车控制系统的PLC设计 - PAGE I - 摘要 可编程序控制器（Programmable Logic controller）简称PLC，由于PLC的可靠性高、环境适应性强、灵活通用、使用方便、维护简单，所以PLC的应用领域在迅速扩大。对早期的PLC，凡是有继电器的地方，都可采用。而对当今的PLC几乎可以说凡是需要控制系统存在的地方就需要PLC。尤其是近几年来，PLC的成本下降，功能又不段增强，所以，目前PLC在国内外已被广泛应用于各个行业。 本设计是为了实现送料小车的手动和自动化的转化，改变以往小车的单纯手动送料，减少了劳动力，提高了生产效率，实现了自动化生产!而且本送料小车的设计是由于工作环境恶劣，不允许人进入工作环境的情况下孕育而成的。 本文从第一章送料小车的系统方案的确定为切入点，介绍了为什么选用PLC控制小车；第二章介绍了送料小车的应达到的控制要求；第三章根据控制要求进行了小车系统的具体设计，包括端子接线图、梯形图(分段设计说明和系统总梯形图)和程序指令设计；最后得出结论。 关键词：PLC 送料小车 控制 程序设计  Abstract Programmable controller (PLC Programmable Logic Controller) abbreviation, because the high reliability, environmental PLC adaptability is strong, flexible gm, use convenient, simple maintenance, so PLC application fields in rapidly growing. For early PLC, always have relays place, can be used. But in todays PLC almost say which require control system where it exists requires PLC. Especially in recent years, PLC to cost down, function and not of enhanced, so, at present PLC at home and abroad, have been widely applied in various sectors. This design is to realize the manual and automatic feeding dolly transformation, change in the past the pure manual feeding, car reduced labor, improve the production efficiency and achieve a automation production! And this feeding dolly design is due to working conditions, does not allow people into working environment situation developed into. This article from the first chapter the feeding dolly system scheme introduced as the breakthrough, indeed: why choose PLC control car; The second chapter presents a feeding dollys should achieve control requirements; Chapter 3 according to the control requirements of the trolley system design, including the terminals specific hookup, ladder diagram (subsection design descriptions and the system total ladder diagram) and program instruction design; Conclusion. Keywords: PLC, feeding dolly, control, program design  目录 TOC \o 1-3 \h \z \u 摘要 I Abstract II 目