泵站进水流道三维流动及水力损失数值模拟.pdfVIP

26 5 Vo.l 26 No. 5 2008 9 Drainage and Irrigation M ach inery Sep. 2008 陆林广, 徐 磊, 梁金栋, 刘 军, 黄金军 ( , 225009) : 提出了将进水流道从水泵装置中分解出来单独进行数 计算的研究方法, 分析了大型泵站 进水流道三维流场及水力损失数 计算的区域边界条件及网格剖分等有关问题, 给出了肘形钟形 和簸箕形等 种形式进水流道三维流场和水力损失数 计算的实例, 并与流道模型试验的流场观察 及水力损失测试结果进行了比较. 结果表明: 提出的进水流道三维流动数 计算方法可以较为准确地 计算进水流道的水力损失, 便于对其进行模型试验验证.应用本方法可以较为方便地对进水流道的水 力性能进行考核和评价, 从而为进水流道优化水力设计所需的多方案比较创造条件. : 泵站; 进水流道; 三维流动; 水力损失; 数 计算 : TV 1 6+ . 2 : A : 1005- 6254( 2008) 05- 0055- 04 Num erical simulation for 3D turbulent flow and hydraulic loss of inlet conduit for pumping station L U L in-guang, X U L ei, LIAN G J in-dong, LIU Jun, H UANG J in-j un ( College ofHydraulic Science Eng ineering, Y angzhou University, Yangzhou, Jiangsu 225009, China) Abstract: Consistentw ith the method of separately testing hydraulic perform ance of inlet condui,t a new method to separately calculate hydrau lic performance of inlet condu it is put forw ard. Problems relative to the numerical smi ulation, such as calcu lation region, boundary cond itions, grid generation etc. are intro- duced. Examples about the flow pattern smi ulation and hydraulic loss calcu lation of types of inlet con- duit, including elbow inlet, bell-like inlet and dustpan-like inlet are illustrated. Numerical calculation resu lts are comparedw ith those from model tests. The resu lts ind icate that themethod of - D numerical calculation can calcu late the hydraulic loss of inlet conduitw ith good accuracy and the loss can be verified conveniently by model test. Furthermore, the method could be ap