标准、规范、准则_ISA 75.03-1992.PDFVIP

S T A N D A R D ISA–75.03–1992 Formerly ISA–S75.03–1992 Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (ANSI Classes 125, 150, 250, 300, and 600) Formerly ISA–S4.0.01 Approved 2 September 1992 TM ISA The Instrumentation, – Systems, and Automation Society ISA-75.03-1992, Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (ANSI Classes 125, 150, 250, 300, and 600) ISBN 1-55617-316-4 Copyright 1992 by the Instrument Society of America. All rights reserved. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of the publisher. ISA 67 Alexander Drive P.O. Box 12277 Research Triangle Park, North Carolina 27709 Preface This preface, as well as all footnotes and appendices, is included for informational purposes and is not part of ISA-75.03-1992. This standard has been prepared as part of the service of ISA toward a goal of uniformity in the field of instrumentation. To be of real value, this document should not be static, but should be subject to periodic review. Toward this end, the Society welcomes all comments and criticisms, and asks that they be addressed to the Secretary, Standards and Practices Board, ISA, 67 Alexander Drive, P. O. Box 12277, Research Triangle Park, NC 27709, Telephone (919) 549- 8411, e-mail: standards@isa.org. The ISA Standards and Practices Department is aware of the