片层组织TA15钛合金的热变形行为及组织球化-中国有色金属学报.pdf

20 1 2010 10 Vol.20 Special 1 The Chinese Journal of Nonferrous Metals Oct. 2010 1004-0609(2010)S1-s0094-06 TA15 ( 710072) Gleeble−3500 TA15 860~970 0.01~1 s−1 TA15 0.34~0.593.4~6.8TA15 TA15 TG 146.2 A Hot deformation behavior and microstructure globularization of TA15 with lamellar structure WU Cheng-bao, YANG He, SUN Zhi-chao, FAN Xiao-guang (State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China) Abstract: The hot deformation behavior and globularization processes of TA15 with lamellar structure were studied in −1 the temperature range of 860−970 and strain rate range of 0.01−1 s by hot compression tests using Gleeble−3500 thermal simulation testing machine. The results show that deformation stress of TA15 alloy with lamellar structure is sensitive to the temperature and strain rate, and the stress peak is higher than that of alloy with equiaxed structure. Further more, the hardening ratio before stress peak and the softening ratio after stress peak increase with lower temperature and higher strain rate. The strain is the most remarkable factor of hot deformation parameters that affect the globularization process. The critical strain for initiation of globularization is between 0.34 and 0.59, and the strain for full globularization is between 3.4 and 6.8. The globularization and bending of lamellar structure are the main reasons of flow softening. Key words: TA15 titanium alloy; lamellar structure; globularizatio