SF光模块研发与测试方法.pptVIP

* Sampling Jitter Measurements Jitter Analysis background Total Jitter CorrelatedData Dependent Jitter (DDJ) Uncorrelated Inter-Symbol Interference(ISI) Duty Cycle DistortionDCD Periodic Jitter (PJ) Random Jitter (RJ)(Unbound) Available in today’s package 谢谢大家！ * * * THANK YOU SUCCESS * * 可编辑 * * 其它编码还有啁啾归零(CRZ)码和载波抑制归零(CSRZ) * OMA 直接影响系统传输的误码率.OMA和ER都是相对量,只确定其中任意一个量都无法最终描述光性能.在知道OMA或ER后确定Paverage或P1或P0就可以完全描述光纤接口性能. P1和P0有时也表示成Ptop-Pdark和Pbase-Pdark * 从公式上看Q主要决定因素是OMA即P1-P0，因此光纤传输系统的OMA越大，BER越好。但是考虑性价比和接收端的负载能力，不可能无限大。 在接收端，要求P1不能无限大，避免超过其负载水平，超过容易饱和反而降低性能。而在发送端，要求P0无限小，趋进于0，这样ER可以无穷大，但是对于发送端也很难做到这一点。因此只能采用一种妥协的方案。 * * * * PCI Express is one such serial standard which defines a structure that allows multiple serial links (called “lanes”) to be added to a system in order flexible scaling of the data transfer capability. Multiple data streams with independent embedded clocks * This slide adds the complimentary (negative) TDR step to the example in order to describe the actual basic differential TDR method predominantly used to characterize eSerial interconnects. * This slide adds the complimentary (negative) TDR step to the example in order to describe the actual basic differential TDR method predominantly used to characterize eSerial interconnects. * * * * At the mid-level this analysis is slightly different from that done on a Real-time oscilloscope. The two do match in the blocks available at the low level. * * ET-RT Basics: ET - one-sample-per-trigger, repetitive pattern required for pulse streams An equivalent-time 8000 series sampling oscilloscope requires a trigger signal: this is generally a user-supplied clock, a recovered clock, or a pattern sync signal synchronous to the signal. Data voltage time Pattern Sync A trigger is required for EACH sampled point in the high bandwidth equivalent-time 8000 scope Minimum time between equivalent-time sampled points on high bandwidth 8000 scope can be adjusted to fractions of a picosecond Pr