供热常用一次仪表.ppt

* 除 * 除 * 除 * 除 * 除 * 除 * 除 * 1.解释SIMATIC 商标 主要见到的SIMATIC 产品 2. 嵌入式操作系统： 把普通电脑的操作系统经过特殊的裁剪，使它的稳定性达到工业级的要求。 3. PC-BASED AUTOMATION: 软PLC,在电脑上跑PLC的逻辑，同样采用梯形图编程。 应用：如果某个特殊的场合，模拟量需要快速的处理，单个PLC不能满足要求，多个plc联网难度又比较大，成本高。这时，采用PC-BASED AUTOMATION的plc，因为标准电脑的cpu都是p4以上的，速度很快，处理能力很强，这样就可以级可以完成控制又可以完成运算。 4.300 的cpu 采用32位的芯片。 因为，一个字=2个字节=16位，而300中可以采用双字，所以32位。 Our SIMATIC 控制器 are based on various hardware and software architectures: Modular 控制器 Modular 控制器 are optimally designed for control tasks and for ruggedness and long-term availability. They can be flexibly expanded at any time via plug-in I/O modules, 功能模块and communications modules. Depending on the size of the application, the right controller can be selected from a large range according to performance, quantity frameworks and communications interfaces. The modular 控制器 can also be used as fault-tolerant or 故障安全型 systems. Embedded Automation Embedded Automation products use the openness of PC-based systems and also offer an increased level of ruggedness. The controller, PC applications and visualization system, if required, run on a shared and rugged platform – without using rotating parts such as hard disks or fans. The operating system used is tailored and optimized to the hardware architecture in each case. The Embedded Automation products are ready-to-use and can be installed directly on DIN rails or at the machine on-site. PC-based 控制器 PC-based 控制器 can run on 标准型 PC systems either as exclusively software PLCs or as slot PLCs in the form of a plug-in card. Any PC applications, visualization tasks, control tasks and 技术功能 can all be easily combined into an overall automation solution. The extensive resources of an industrial PC, such as the work 存储器, are used for this purpose. * 除 * 除 * 除 * 除 * 除 * 1.解释SIMATIC 商标 主要见到的SIMATIC 产品 2. 嵌入式操作系统： 把普通电脑的操作系统经过特殊的裁剪，使它的稳定性达到工业级的要求。 3. PC-BASED AUTOMATION: 软PLC,在电脑上跑PLC的逻辑，同样采用梯形图编程。 应用：如果某个特殊的场合，模拟量需要快速的处理，单个PLC不能满足要求，多个plc联网难度又比较大，成本高。这时，采用PC-BASED AUTOMATION的plc，因为标准