年产300万吨合格连铸坯转炉炼钢厂设计毕业论文.doc

年产300万吨合格连铸坯转炉炼钢厂设计毕业论文 内蒙古科技大学 本科生毕业设计说明书 题 目年产300万吨合格连铸坯转炉钢厂设计 学生姓名王建鹏 学 号0603102106 专 业冶金工程 班 级冶金2006-1班 指导教师董方 教授 年产300万吨合格连铸坯转炉钢厂设计 摘 要 根据设计任务书的要求完成年产300万吨合格铸坯转炉钢厂设计在设计中制定了产品大纲计划生产的主要钢种为普碳钢优质碳素钢合金结构钢硅钢等设计内容分为以下几部分150吨转炉设计氧枪供料系统除尘系统设计铁水预处理系统设计炉外精炼系统设计两台板坯连铸机设计车间设计等完成全连铸炼钢厂生产设备的选择计算根据所定的产品大纲本次设计的全连铸钢厂采用的工艺流程为铁水预处理顶底复吹转炉LF钢包精炼炉RH精炼炉板坯连铸机采用了长寿复吹溅渣护炉PLC自动控制煤气回收利用等一系列技术使钢厂在物料消耗资源利用环境保护等方面达到国内先进水平 设计过程中本着投资省经济效益佳多品种高质量生产安全操作顺利维修方便和符合国家产业政策的原则并参阅了相关文献资料充分借鉴了国内外先进企业生产经验在设计中采用了国内外钢铁生产的先进设备和技术使以上生产方案具有科学性先进性经济合理适应当前社会发展的需要 关键词 150t转炉长寿复吹LF钢包精炼炉RH精炼炉 Design of all continuous casting converter steel plant that can handle three million tons of qualified slab Abstract According to the design requirements of the mission we accomplish annual output of 3 million tons of qualified casting slab converter steel plant design we establish the product outline planning production of the carbon steelhigh quality carbon steel structural alloy steel ferrosilicon steel and so onDesign consists of the following parts the 150t converter design lance feeding systemdust system design the iron pretreatment design secondary refining designslab caster design casting steelworks completed all the relevant production equipment selection The process of 100 continuous casting steel isthe iron pretreatment–top and bottom blowing converter –LF ladle refining furnace–RH refining furnace–continuous casting slab The design adopt long service life combined blowing splashing slag to protect furnace line PLC autocontrol the coal gas reclaiming and using and a series of advanced technology this make the plant reach advanced level in the field of material consumption resource using environmental protection etc This design which I contrive base on to be less investment be benefit in economic have many brand be high quality produce safety operate smooth maintain convenience and regulating principle of the nationand I refer to a great deal of stuffa great deal of producing