TPS61165中文资料.pdfVIP

元器件交易网 TPS61165 SLVS790 – NOVEMBER 2007 High Brightness White LED Driver in 2mm x 2mm QFN Package The default white LED current is set with the external 1FEATURES • 3-V to 18-V Input Voltage Range sensor resistor Rset, and the feedback voltage is regulated to 200mV, as shown in the typical • 38-V Open LED Protection for 10 LEDs application. During the operation, the LED current can • 200-mV Reference Voltage With 2% Accuracy be controlled using the 1 wire digital interface • 1.2-A Switch FET With 1.2-MHz Switching (Easyscale™ protocol) through the CTRL pin. Frequency Alternatively, a pulse width modulation (PWM) signal can be applied to the CTRL pin through which the • Flexible 1 Wire Digital and PWM Brightness duty cycle determines the feedback reference Control voltag