毕业设计双闭环串级自动调速系统设计及MATLAB仿真.docxVIP

摘 要 在穿孔轧机屮采用晶闸管串级调速，可以达到节能调速的目的，因此本课题具 有实际的应用价值。根据穿孔轧机对电气传动系统的要求，本文选择了转差冋馈型 的串级调速方式，调速系统效率高，能较好的满足转矩过载能力和静、动态特性的 要求。 本系统采用了具有电流内环和速度外环的典型的双闭环自动调速系统结构、集 成的触发电路和综合的过流过压保护电路。在已知的工艺过程和技术要求下，计算 了整流器、逆变器及双闭环的动态参数等。调节器的设计是本系统设讣的重点，电 流调节器和速度调节器都选择了模拟PI调节规律，能较好的实现穿孔轧机自动调速 功能，满足了要求的技术指标。本系统进行了 MATLAB仿真，仿真结果基本满足了 系统要求，如果本系统能够应用到实际的生产中，将会提高生产效益。 关键词：串级调速 交流调速 双闭环 穿孔轧机PI调节器 Abstract Adopting thyristor cascade speed control in perforation rolling mill, can reach the purposes of energy-saving and speed-adjusting, wherefore this topic take on practical application value. According to the electric driving system requirement of perforation rolling mill, slipping feedback type cascade speed control mode the is selected, speed governing system which is high efficiency, is able to better satisfy cogging force overload capacity and the require of static and dynamic characteristics. The system use double closed loop automatic speed regulation system which has current internal loop and velocity external loop, integrated flip-flop circuit and comprehensive overflowing and over-voltage protection electronic circuit. Both at given process engineering and technical requirement， calculate current rectifier, inverter and double loop-locked dynamic parameter etc. The design of the adjuster is the system designs emphases, upper selection of the regulator, having select simulation proportional?intergral controller in the current regulator and speed controller, which are able to better realize perforation roll automatic speed regulation function and satisfy required technical criteria .The system proceed MATLAB simulation, whose result basic satisfy system^ requirement, in the event of the system in a position to application to practical on line , would improve production benefit ? Keyword： cascade speed control \ intercourse speed regulation \ double closed loop \ perforation roll \ simulation proportional-intergral controller. TOC \o 1-5 \h \z \o Current Document 第一章绪论 1 \o Current Document 1