一种假肢膝关节测量系统的标定办法.pdfVIP

Optoelectronics 光电子, 2017, 7(3), 87-94 Published Online September 2017 in Hans. /journal/oe /10.12677/oe.2017.73013 A Method of Calibration of A Prosthetic Knee Joint Measurement System Zhe Gong, Xin Ju, BingCai Liu School of Optoelectronic Engineering, Xi’an Technological University, Xi’an Shaanxi th st th Received: Sep. 7 , 2017; accepted: Sep. 21 , 2017; published: Sep. 28 , 2017 Abstract The laser triangulation method is a traditional non-contact three-dimensional contour measure- ment method, which has its unique advantages in contour measurement of objects. Based on the study of prosthetic knee joint surface, the laser triangulation method and the camera system cali- bration scheme proposed in this paper are used to construct the experimental platform of pros- thetic knee joint measurement. The three-dimensional coordinates of the prosthetic knee joint are obtained. The three-dimensional reconstruction of prosthetic knee joint laid the foundation. And a brief analysis of the camera calibration of the traditional laser triangulation method is proposed, and a simple laser triangulation camera system calibration scheme is proposed. Because of the simple structure of this scheme, easy to analyze, the use of flexible and convenient advantages, it has a wide range of development space and application prospects. Keywords 3D Reconstruction, Laser Triangulation, Camera System Calibration 一种假肢膝关节测量系统的标定方法 龚 喆，鞠 鑫，刘丙才 西安工业大学光电工程学院，陕西 西安 收稿日期：2017年9月7 日；录用日期：2017年9月21 日；发布日期：2017年9月28 日 摘 要 激光三角法是一种传统的非接触式的三维轮廓测量方法，在物体的轮廓测量方面有着其独特的优势。本 文章引用: 龚喆, 鞠鑫, 刘丙才. 一种假肢膝关节测量系统的标定方法[J]. 光电子, 2017, 7(3): 87-94. DOI: 10.12677/oe.2017.73013 龚喆 文基于对假肢膝关节面的研究，