配电网监控主机的软件设计.docVIP

山东科技大学学士学位论文 摘要 摘要 配电所自动化系统近年来发展迅速，但是主要着眼于110kV 和35kV电压等级。10kV配电所多处于送电终端，事故影响面较小，配电所自动化发展相对缓慢。此外，由于城市低压配电所所处的地理环境复杂，针对供电部门的实际需要，需要开发一套低压配电所自动化监控系统。该系统利用方便的通讯方式可以实现对配电所的遥信、遥测和遥控，有效地提高城市低压网安全运行和供电可靠性。 在吸收目前国内外流行的监控软件的优点和特点的基础上，本文针对配电网系统运行原理，研究开发了一个电力监控系统软件，实现了监控系统所需的基本功能。本系统以WIN XP为开发平台，以V B 6.0为开发工具，数据库部分使用的是Microsoft Office Access 2003，以面向对象技术作为设计思想，采用模块化程序设计方法，具有一定的通用性。 关键词：监控系统、模块化设计、数据库 ABSTRACT The electric distribution station automation technology develops rapidly recent years, but the technology lays stress upon 110kV and 35kV level distribution station. 10kV distribution stations are often located at electric distribution terminals and the domain of accident influence is little, so 10kV distribution stations automation technology develops slowly. In addition, because the geographic environment of the station is complicate, a low voltage distribution station automation supervisory and control system is necessary for power supply consume departments. The system realizes remote signalling, remote measuring and remote controlling by handy communication way. It improves safety and reliability of city low voltage electric fence effectively. On the base of the absorption with domestic and international supervisory control system in popularity, this project have successfully developed a supervisory control configuration software of transformer substation. The system is designed regarding WIN XP as operation system, and VB 6.0 as developing tool, and Microsoft Office Access 2003 as database. The system have the characteristic of modularization, and have universal property, its planning idea is oriented object technology. Key words: Supervisory Control System, Modularization plan, Access 2003 目录 TOC \o 1-2 \h \z \u 1 绪论 1 1.1配电网的概述 1 1.2本课题研究的的意义和目的 2 1.3论文研究的主要内容简介 3 2 配电网监控主机系统概述 6 2.1配电所自动化监控技术现状 6 2.2配电网监控系统总体结构 7 2.3配电网监控主机的任务 9 3 配电网监控主机通信电路设计 10 3.1 通信模块的硬件电路简介