伊泰集团李家梁煤矿400万t新井设计.pdf

摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为伊泰集团李家梁煤矿400万t/a新井设计，共分10章：1.矿区概 述及井田地质特征；2.井田境界和储量；3.矿井工作制度、设计生产能力及服 务年限；4.井田开拓；5.准备方式- 盘区巷道布置；6.采煤方法；7.井下运输；8.矿井提升；9.矿井通风与安全技术； 10.矿井基本技术经济指标。 伊泰集团李家梁煤矿位于内蒙古自治区东胜煤田勃牛川矿区西南部，主 采煤层一层，即6号煤层，倾角1~3°，平均厚度5.5m，煤层埋深浅，地质条件简 单，煤层有自然发火倾向，发火期40~60d，煤层具有强爆炸危险性。井田工业 储量为43304.3万t ，可采储量31591.6万t ，适宜布置大型矿井，矿井设计产量4 00万t/a ，设计服务年限为60.8a。 设计矿井采用斜硐单水平开拓，前期采用中央并列式通风，后期采用两 翼对角式通风。一矿一面，采煤方法为厚煤层综采一次采全高全部垮落法。 煤炭运输采用钢丝绳芯胶带，辅助运输采用无轨胶轮车。 矿井年工作日为330 d，每天净提升时间16 h 。矿井工作制度为：实行 “三八”制作业，（两班生产，一班检修），每日两班 出煤。 专题部分题目为三软煤层综采工作面围岩加固技术。以平煤集团五矿已 17 －23130综采面为背景，分析了三软煤层综采工作面的围岩破碎机理，并设 计了“三软煤层”工作面顶板、煤壁的加固方案。 翻译部分是一篇关于渗透性影响煤的变形对甲烷的回收和二氧化碳的 分离中的应用的论文。 关键词：斜 ；盘区；大采高；无轨运输；混合式通风 ABSTRACT This design includes of three parts: the general part, special subject part and translated part. The general part is a new design of Lijialiang mine. Lijialiang mine lies in south of Eerduosi in NeiMenggu province. The six is the main coal seam, and its dip angle is 1 degree. The thickness of the mine is about 5.50m in all. It is bituminous coal with low mine gas emission rate and coal spontaneous combustion tendency, and it’s a coal seam liable to dust explosion.The proved reserves of the minefield are 433.04 million tons. The recoverable reserves are 315.95 million tons. The designed productive capacity is 4 million tons percent year, and the service life of the mine is 60.80 years. The well farmland is a single level in an inclined and calm well to expand. The working system “three-eight” is used in the Lijialiang mine. It produced 330d/a. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the under