用分层互信息和薄板样条实现医学图像弹性自动配准-Read.PDFVIP

第 17 卷 第 7 期 计算机辅助设计与图形学学报 Vol 17 , No7 2005 年 7 月 JOURNAL OF COMPU TERAIDED DESIGN COMPU TER GRAPHICS J uly , 2005 　 用分层互信息和薄板样条实现医学图像弹性自动配准 1 ,2) 1) 1) 1) 2) 冯 　林 　张名举 　贺明峰 　戚正君 　滕弘飞 1) (大连理工大学大学生创新院　大连　116024) 2) (大连理工大学机械工程学院　大连　116024) (fenglin @dlut educn) 摘 要 　提出了一种基于分层互信息和薄板样条自动确定标记对应点的选取方法 ,将图像按照由粗到精的原则 ,将 每个图像分成若干个对应子块进行配准后 ,在每个子块图像中按照一定规则选取两个对应点 ,实现图像弹性自动配 准 实验结果表明 ,该方法是一种理想的非刚性图像自动配准方法 关键词 　非刚性医学图像配准 ;互信息 ;薄板样条 ; 自动选点 中图法分类号　TN39141 A NonRigid Medical Image Registration Approach Based on Hierarchical Mutual Information and ThinPlate Spline Feng Lin1 ,2) 　Zhang Mingju 1) 　He Mingfeng1 ,3) 　Qi Zhengjun 1) 　Teng HongFei2) ) 1 ( ) Instit ute of U niversity St udents ’Innovation , Dalian U niversity of Technology , Dalian 　116024 ) 2 ( ) Instit ute of Mechanical Engi neeri ng , Dalian U niversity of Technology , Dalian 　116024 Abstract 　　Multimodel nonrigid medical image registration plays an important role in diagnosis work The approach most widely used is by marking control points manually first and then calculating the trans form coefficients The method however is poor in efficiency and accuracy A new control point selection ap proach based on Hierarchical Mutual Information and Thinplate Spline is presented in this paper By the approach the image is divided into pieces , and then two control po