电气集中工程设计毕业设计论文.docVIP

兰州交通大学毕业设计（论文） - PAGE IV - 摘 要 电气集中联锁是车站信号系统中运用时间最长，技术较成熟完善，在目前较为普遍使用的用以保证行车安全、提高运输效率的技术设备。 本设计所选模拟站场——安宁站，设计名称为提速区段安宁站下行咽喉6502电气集中工程设计，设计内容包括：车站信号平面布置图、双线轨道电路图、控制台盘面图、组合连接图和组合排列表、信号楼室内布置图、联锁表、电缆径路和电缆网络图。车站信号平面布置图能正确反映电气集中室外主要设备的布置情况，主要完成道岔、警冲标、信号机坐标的计算并确定其位置；双线轨道电路图中站内采用25Hz轨道电路，需完成轨道电路的极性配置、扼流变压器的设置以及送受电端的布置；控制台盘面图包括单元类型的选择及各种按钮的布置等；组合连接图和组合排列表，绘制组合连接图，运用特有的组合架排列方法来编制组合排列表；信号楼室内布置图，即反映室内各种设备的布置情况；联锁表，表中包括基本进路的选择、敌对信号的确定、轨道区段侵限检查等；电缆径路和电缆网络图，需根据公式计算电缆长度，选择电缆径路以及计算所需芯线数。 关键词：电气集中；工程设计；提速区段 Abstract Electric interlocking is used the longest time to the station railway signal system in our country which can ensure traffic safety and improve transport efficiency, it is more mature and improved equipment. The design selected for a actual station——Anning station, the design is the engineering design of 6502 electrical interlocking for down throat of speed section Anning station. The design elements includes: the signal layout map, two-circuit track, console disk map, combination of connectivity maps and ranked list of combinations, indoor equipment layout in signal tower, interlocking table, cable pathways and cable network, according to formula to calculate the length of cables. The signal layout map, which accurately reflect the setting circs of the main outdoor facilities, the main task to complete are the switch, police marked red and the signal machine calculation of the coordinates and determination of their locations. Two-circuit track, the station uses 25Hz track circuit, the main task to complete are the track circuit polarity configuration settings, choke transformer and the arrangement of the end of sending or receiving power Console disk map, including the cell types of selection and the arrangement of the various buttons, etc. Combination of connectivity maps and ranked list of combinations, drawing portfolio connection graph, and then use the unique approach of unit block assembly rack to preparate the portfolio with the list scheduling. Indoor equipme