amba_总线_介绍资料教材.pptVIP

* 例：DMA Step0：CPU检查DMA的状态以确认是否可用 While(1) { Read(0x30004,status) if(status == 0) break; } * 例：DMA Step1：CPU设置（source address）、（destination address）（size） Write (0x30008,0x10000) Write(0x3000C,0x20000) Write(0x30010,0x100) Step 2: 启动DMA Write(0x30000,0x1) * 例：DMA Step3： DMA把数据从memory 1 传送到memory 2 * 例：DMA Step 4：DMA 向CPU发出中断请求 Step 5：CPU检查DMA的状态 Read(0x30004, status) * All systems require some master to be granted at any time. If no master is requesting then you should grant a master by default. However there are two types of “default” master. The first is a simple dumm