【精品文档】关于单片机锅炉温度控制系统设计有关的外文文献翻译：基于单片机加热温度自动控制系统.pdf

Advanced Materials Research Vols. 591-593 (2012) pp 1664-1668 Online: 2012-11-29 © (2012) Trans Tech Publications, Switzerland doi:10.4028//AMR.591-593.1664 Based On Single Chip Microcomputer Heating Temperature Automatic Control System De Yong Liu1,a, Hong Song2,b, Zhi Qiang Kong3,c 1,2,3Sichuan University of Science and Engineering,ZiGong ,China a b c 491635239@, sh8887878@, 394356099@ Keywords: AD590, ADC0809, AT89C51, CD4511. Abstract. The temperature control is one of the most common control system,with the development of the sensing technology, new single-bus digital temperature sensor to achieve faster development of the test and control of the temperature. The system is a temperature sensor AD590 to acquisition analog signals, after ADC0809 converted into digital signals to 89C51 single chip processing, so as to achieve the collection of temperature, and then through the CD4511 drive seven sections LED display. The system can control of temperature, through the keyboard for temperature of add or subtract Settings, if detection temperature is more than set temperature, stop heating, if detection temperature is below the set temperature, start heating. The system of design and wiring are simple,easy extension, cost-effective, volume is small, compact structure,strong anti-interference ability. Introduction the Application of the System. With the development of economy, people need to monitoring and control all sorts of system of temperature. Heating furnace is the main process equipment of metallurgical enterprise, its automatic control strategy is an important research direction in the field of proce