第5章 模型输入及修复.ppt

* * * * * * * * * * * * * * * * * * * * * * * * * * * * If areas/lines are MERGED during the import process users will first need to detach (ARDETACH or LNDETACH) before deleting the entity (geometry repair menu). * Analogous ANSYS modeling commands LNFILL = LINE (creates straight lines between chosen keypoints) ARFILL = AREA (creates areas by choosing line pattern) * * * * * * * * * * 5.7.6 连杆模型的输入/修正(续) 3b. 平移工作平面到新的关键点: Utility Menu Workplane Offset WP to Keypoints + 在孔洞中心拾取新的关键点 或用命令: KWPAVE, 1 5.7.6 连杆模型的输入/修正(续) 3c. 创建一个圆柱体，为生成孔洞作准备: Main Menu Preprocessor -Modeling- Create