建筑制图导向GIS化之探讨-以revit为探讨之工具.pdf

建築製圖導向GIS化之探討- 以Revit為探討之工具 The Discussions of Architecture Drawing Going toward GIS – Taking Revit as a Study Tool 1 2 3 黃偉訓 唐清浿 徐輝明 Wei-Hsun Huang Ching-Pei Tang Hui-Mi Hsu 摘要 GIS 多年來於產業發展上漸趨成熟，但直至目前為止，即便目前建築設計利用 CAD/CAE電腦輔助設計已行之多年，地理資訊系統 (GIS)與建築設計領域結合應用仍 屬少數。本研究以軟體 Autodesk Revit Building建立建築元素，再利用共通之座標系統 結合地景及地物，可充分展現3D立體虛擬環境，建築採此種構件元素導向以及大地 座標化，已經充分GIS化，並已架構了建築控制與GIS二者之橋樑。研究成果可提供 建築設計、都市規劃或地域學中於規劃設計階段可有效進行基地配置、空間設計等工 作。 關鍵字：電腦輔助設計、電腦輔助工程、地理資訊系統、座標系統、 Autodesk Revit Building ABSTRACT Within these few years GIS has applied to commercial uses successfully. Nevertheless, the application corresponding to Architecture is still not seen yet even though CAD/CAE has been implemented long enough. This study used the software of Autodesk Revit Building to build up a building model with the concept of element-by-element. In addition, utilizing a common coordination system to combine with the surrounding terrain effectively provided a 3-D digital model easy for other valuable uses. In fact, the techniques of the so-called element-by-element and the common coordination system successfully created a communication bridge between architecture control and GIS. Hopefully, the results of this study may provide for the architecture, urban planning or area study to use for the purposes of site planning, spatial design, etc. Keywords: CAD, CAE, GIS, Coordination System, Autodesk Revit Building 1 國立宜蘭大學建築與永續規劃研究所研究生 2 台灣歐特克股份有限公司技術平臺及建築業解決方