产品资料：德尔福Multec®多孔汽油直喷喷油器_EN.pdfVIP

POWERTRAIN SYSTEMS ® Delphi Multec GDi Multi-Hole Fuel Injectors Delphi Multec® GDi Multi-Hole Fuel Injectors are designed for homogeneous combustion gasoline direct injection engine applications. This family of flexible packaging and performance- optimized injectors features an inwardly opening valve group and a multi-hole spray generator. The Multec 10 GDi Injector is capable of high pressure, up to 200 bar nominal system pressure with maximum 230 bar. The Multec 12 GDi Injector is capable of 200 bar nominal pressure with maximum pressure of 260 bar. Additional enhancements are available with the Multec 12.1 GDi Injector, which offers improved high pressure, multi-pulse operation of 250 bar nominal and 320 bar maximum, and reduced minimum fuel capability. Benefits • Moving mass emits 1 dB lower acoustic noise than the rest of the industry ® • Excellent fuel deposit robustness Delphi Multec GDi Multi-Hole Fuel Injector • Valve group provides PZEV-capable fuel seal • Flexible spray pattern with low penetration reduces fuel impingement on cylinder walls and allows flexible mounting • Corrosion resistance, flow performance, and linear range to accommodate the requirements of ethanol-blended fuels • Magnetic circuit is compatible with 50 V to 65 V boost voltage • Decoupled armature allows up to 260 bar operating pressure with minimal driver energy • Faster response times allow smaller injection quantity and greater working flow range • Can operate with dwell times as low as 0.5 msec during multi- injection operation for Euro 6 particula