受电弓滑板与接触网导线接触电阻计算模型-电工技术学报.pdf

20 13 年 5 月 电 工 技 术 学 报 Vol.2 8 No. 5 第28 卷第 5 期 TRANSACTIONS OF CHINA ELECTROTECHNICAL SOCIETY May 2013 受电弓滑板与接触网导线接触电阻计算模型 陈忠华 石英龙 时 光 王智勇 康立乾 （辽宁工程技术大学电气与控制工程学院 葫芦岛 125105） 摘要 受电弓滑板与接触网导线之间的接触电阻特性直接影响弓网系统载流性能。本文通过 浸铜碳滑板与铜锡接触导线的滑动电接触实验，研究了不同因素对接触电阻特性的影响。结果表 明，受电弓滑板与接触网导线无载流静态接触时，接触电阻随着接触压力的增大而减小；无载流 滑动接触且接触压力不变时，接触电阻随着滑动速度的增大而增大；强电流滑动接触且接触压力 和滑动速度不变时，接触电阻随着接触电流的增大而减小。针对接触压力、滑动速度、接触电流 对受电弓滑板与接触导线接触电阻特性的影响建立了接触电阻的计算模型，通过改进的高斯-牛顿 迭代算法对模型的待定参数进行了求解并证明了模型的有效性。 关键词：受电弓滑板 接触导线 接触电阻 计算模型 高斯-牛顿迭代算法 中图分类号：TM501 Calculation Model of the Contact Resistance between Pantograph Slide and Contact Wire Chen Zhonghua Shi Yinglong Shi Guang Wang Zhiyong Kang Liqian （Liaoning Technical University Huludao 125105 China ） Abstract The characteristics of the contact resistance between pantograph slide and contact wire directly affect the current-carrying performance of the pantograph catenary’s system. Sliding electrical contact experiment with Cu impregnation carbon strips and Cu -Sn alloy contact wire was conducted and the relationships between different experimental conditions and contact resistance are researched. The following conclusions are obtained by analyzing the experimental results. Under zero contact current conditions, if pantograph slide and contact wire keeps in relative static state, contact resistance will decrease with the increase of contact pressure . And if the pantograph slide and contact wire keeps in relative sliding state with a constant contact pressure, contact resistance will increase with the increase of sliding speed. But under strong current sliding contact state conditions, contact res