国产新型精梳设备与进口精梳设备差异.docVIP

国产新型精梳设备与进口精梳设备差异 PAGE 国产新型精梳设备与进口精梳设备差异 摘要 介绍了精梳工序的质量指标及其控制范围；总结出精梳落棉、精梳棉结、精梳条条干CV值、重量不匀率等质量指标的控制原理及控制方法。顶梳插入深度受制于落棉隔距的放大。后退给棉比前进给棉对棉须丛多一次梳理循环。落棉率的大下不足以衡量精梳机梳理度的依据，重在精梳条含短绒率。 剖析E65型精梳机的性能特点。概述了变速传动技术、三上三下附压力棒曲线牵伸等创新技术在E65型精梳机上的应用，同时也提出了E65型精梳机输出棉网边缘状态不佳、分离罗拉传动机构组成复杂等缺陷。 剖析国产F1268新型精梳机的性能特点。F1268新型精梳机主要采用的是日本松下PLC微型电脑和处理器处理各项程序和步骤，从而大大简化了电气控制系统。国产精梳机的进步确实非常快，有些设备的技术水平也很高，但是纺织行业技术进步、更新改造的步伐更快，某些国产设备的进步显然没有跟上纺织需求的步伐。 关键词：精梳机；技术创新；锡林；梳理质量；牵伸系统 innovate technology fault and develop intellectual property comber Abstract Qrality indexes and control range of combing process were introdrced. Control principle and methods of quality indexes such as comning waste percentage, comning neps,evenness CV of comning sliver, weight unevenness and so were sunnarized. Insertion length of top comb is relative with magnisfication of noil gauge,carding circulation in backward feeding is one more timethan forward feeeding.Waste percentage is not enough to define degree of carding of combing machine,main reference for defing it is short fiber content of combed sliver. Property speciality of E65comber was discussed,application of change speed driving technology and three-up-three-down additional press bar curve draft system et al on E65comber were introduced.Fault of worse margin cotton web,complex detaching roller mechanism and so on of E65 comber were proposed. It shows that national machinery enterprise should bring in advanced technology,innovate technology fault,and develo