pex10压力变送器,德国tecsis压力变送器.docVIP

tecsis GmbH DE 770 Carl-Legien Str. 40 D-63073 Offenbach / Main Sales national Sales international p. 1 / 4 Tel.: +49(0 69 / 5806-0 Fax: +49(0 69 / 5806-170 Fax: +49(0 69 / 5806-177 | Force | Pressure | Temperature | Switch Pressure sensors Ex ia I / IIC T6 acc. to ATEX with internal diaphragm with front flush diaphragm Accuracy: 0,25% and 0,5 % Standard output: 4...20 mA; 2-wire system Description - pressure sensors Industrial Heavy Duty are top of the range products in Ex - pressure gauge technology. The intrinsically safe Ex - pressure sensors are designed for zone 1 (optional mount on Zone 0 and have special type approval for use in potentially explosive atmospheres and a CENELEC certificate according to the ATEX certification. The measuring ranges, graded in accordance with EN, range from 100 mbar to the maximum pressure range of 1000 bar. The case and wetted parts comprise stainless steel and are thus resistant to chemically aggressive media. The pressure connection and measuring element are welded together, making the measuring system particularly resistant to mechanical shock or vibration. The pressure connection is fitted with a G ? male thread. Several electrical connections can be obtained to pick up the electrical output signal. The front flush pressure diaphragm avoids zones, in which medium could crystallize or residues could form The field case design enables use in aggravated operation conditions. The Ex - pressure sensors Industrial Heavy Duty meet the electronic magnetic compatibility (EMC requirements to EN 61326. Features O intrinsically safe, zone 1 O option: build to zone 0 O high long-term stability O high accuracy O finely graded selection of nominal pressure ranges according to EN O corrosion resistant stainless steel design O good repeatability O high overload protection O for dynamic and static measurements O simple installation O ATEX certficate Measuring ranges High pressure Negative -1...0 bar to -0,1...0 bar Positive 0...0,1 bar to 0