折线型双节点整体主桁制作工艺研究.pdfVIP

加工制作 折线型双节点整体主桁制作工艺研究 张 阔 ( ， 北秦皇岛 066205) 中铁山桥集团有限公司 河 : ， 摘 要 目前我国整体节点铁路钢桥主桁全部采用加长上弦杆靠拼接板错孔起拱工艺制作 沪通长江大桥主航道 、 ， 。 桥主桁采用一种新型工艺即系统线在上 下弦杆节点板处预起拱 这种方法降低了工地安装架设的难度 依据沪 、 ， ， 通长江大桥主航道桥主桁的结构特点 制作工艺要求 着重介绍阐述沪通长江大桥主航道桥主桁的制作工艺 提出 。 。 制造工艺中的控制要点和具体控制措施 依据该制作工艺沪通长江大桥主航道桥主桁顺利制作完成 : ; ; 关键词 主桁 制作工艺 控制要点 DOI :10. 13206 /j． gjg201703018 ＲESEAＲCH ON THE MANUFACTUＲING PＲOCESS OF THE MAIN TＲUSS WITH DISCOUNT AＲCH TYPE DOUBLE JOINTS FOＲ STEEL TＲUSS GIＲDEＲ BＲIDGE Zhang Kuo (China Ｒailway Shanhaiguan Bridge Group Co． Ltd ，Qinhuangdao 066205 ，China) ABSTＲACT :The manufacturing process of arch camber by extended chord and staggered perforated plate has been widely used in the main truss of integral joints for railway steel bridge ，the main truss of main channel navigable bridge of the Hutong Yangtze Ｒiver bridge applied a new technology that line system in the gusset plates of the bottom chord of discount in arch． This method could reduce the difficulty of site installation and erection． According to the structure characteristics and manufacturing process requirements for the main truss of main channel of the Hutong Yangtze Ｒiver bridge ，this paper introduced emphatically the manufacturing process of the main truss as well as the control key points and the specific control measures． The construction of the main truss of main navigable channel bridge wa