Juniper防火墙命令配置、界面配置、中文解释对照表.pdf

参数 时区设置 虚拟路由器设置 ALG 认证和管理员属性 ZONE设置 接口设置 Flow设置 HA设置 SYSLOG SNMP VPN 命令 set clock dst-off set clock ntp set clock timezone 8 set ntp server x.x.x.x set ntp server backup1 x.x.x.x set ntp server backup2 x.x.x.x set ntp max-adjustment 0 set vrouter trust-vr sharable unset vrouter trust-vr auto-route-export unset alg sip enable unset alg mgcp enable unset alg sccp enable unset alg sunrpc enable unset alg msrpc enable unset alg rtsp enable unset alg h323 enable set auth-server Local id 0 set auth-server Local server-name Local set auth-server XXXX id 1 set auth-server XXXX server-name x.x.x.x set auth-server XXXX account-type admin set auth default auth server Local set auth-server XXXX radius secret xxxx set auth-server ACS radius port 1646 set admin name ccb set admin password xxxxxxxxx set admin manager-ip x.x.x.x x.x.x.x set admin auth timeout 10 set admin auth server XXXX set admin auth banner console login Access is ….ly set admin privilege get-external set admin format dos set zone Trust vrouter untrust-vr set zone Untrust vrouter untrust-vr set zone DMZ vrouter untrust-vr unset zone Trust tcp-rst set zone Trust block unset zone Untrust tcp-rst set zone Untrust block set zone Untrust screen tear-drop set zone Untrust screen syn-flood set zone Untrust screen ping-death set zone Untrust screen ip-filter-src set zone Untrust screen land set zone Untrust screen alarm-without-drop set interface ethernet1/1 zone xxx set interface ethernet1/1 ip x.x.x.x/x set interface ethernet1/1 route set interface ethernet1/1 manage-ip set interface ethernet1/1 ip manageable set interface ethernet1/1 manage xxxx unset flow tcp-syn-check set flow tcp-syn-bit-check set flow syn-proxy syn-cookie set flow