BP USPL 安全手册：明火作业管理 Safety Manual - Hot Work.pdf

BP U.S. Pipelines and Logistics (USPL) Hot Work Safety Manual Page 1 of 20 Hot Work 1. Purpose Hot work is work that could produce a source of ignition, such as sparks, flames, or temperatures high enough to cause the ignition of flammable gases or combustible materials. The purpose of this policy is to define the requirements for performing hot work that requires a permit and the responsibilities of individuals serving in roles regarding hot work operations. 2. Scope This policy applies to all employees and contractors while performing hot work for USPL. The following policies in this safety manual are either referenced or are applicable to this policy and should be consulted for specific related requirements and guidance: Air Monitoring Electrical Safety Authorization to Work Level 2 Hazards Identification and Task Risk Assessment (HITRA) Confined Space Entry 3. Minimum Requirements Supporting Minimum Requirements Documentation 1. A Hot Work Permit shall be completed and issued prior to conducting Sections 6 and 7, Primary Source Ignition (PSI) hot work (except in a designated area or performing Appendices I and shielded PSI outside a Class 1 area); and Secondary Source Ignition (SSI) Class 1 hot