英文文档系列 | Problems and solutions that are easy to occur when processing TPE raw materials.pdf免费

Problems and solutions that are easy to occur when processing TPE raw materials 1 Finished product deformation Possible reasons:1.The cooling time is too short, the finished product is not enough to cool; 2. The mold opening speed is too fast, and the tensile deformation is strong;3.Theproduct structure is defective;4. Themold temperature istoohigh,and thefinishedproduct isnot cooled. Solution:1.Extendthecoolingtime;2.Slow downthemoldopening speed; 3. Modify the mold; 4. Reduce the mold temperature. 2 ray Possible reasons:1. The rate of fire is too fast, the air in the cavity canno