数字信号处理实验报告材料2.pdfVIP

实用 Name : Section : Laboratory Exercise 2 DISCRETE-TIME SYSTEMS: TIME-DOMAIN REPRESENTATION 2.1 SIMULATION OF DISCRETE-TIME SYSTEMS Project 2.1 The Moving Average System A copy of Program P2_1 is given below : % Program P2_1 % Simulation of an M-point Moving Average Filter % Generate the input signal n = 0:100; s1 = cos(2*pi*0.05*n); % A low-frequency sinusoid s2 = cos(2*pi*0.47*n); % A high frequency sinusoid x = s1+s2; % Implementation of the moving average filter M = input( Desired length of the filter = ); num = ones(1,M); y = filter(num,1,x)/M; % Display the input and output signals clf; subplot(2,2,1); plot(n, s1); axis([0, 100, -2, 2]); xlabel( Time index n ); ylabel( Amplitude ); title( Signal #1 ); subplot(2,2,2); plot(n, s2); axis([0, 100, -2, 2]); xlabel( Time index n ); ylabel( Amplitude ); title( Signal #2 ); subplot(2,2,3); plot(n, x); axis([0, 100, -2, 2]); xlabel( Time index n ); ylabel( Amplitude ); title( Input Signal ); subplot(2,2,4); plot(n, y); axis([0, 100, -2, 2]); xlabel( Time index n ); ylabel( Amplitude ); title( Output Signal ); axis; 文档 实用 Answers: Q2.1 The output sequence generated by running the above program for M = 2 with x[n] = s1[n]+s2[n] as the input is shown below . The component of the input x[n] suppressed by the discrete-time system simulated by this program is – s2 Q2.2 Program P2_1 is modified to simulate the LTI system y[n] = 0.5(x[n] –x[n –1]) and proces