蒸汽发生器综合试验台架数字仿真试验系统DIGITALSIMULATION.pdf

CNIC-01459 RINPO-0022 蒸汽发生器综合试验台架 数字仿真试验系统 DIGITAL SIMULATION TEST SYSTEM FOR STEAM GENERATOR MULTI-PURPOSE THERMALHYDRAULIC TEST FACILITY (In Chinese) 中 国 核 情 报 中 心 China Nuclear Information Centre CNIC-01459 RINPO-0022 蒸汽发生器综合试验台架 数字仿真试验系统 姚 勇 (核动力运行研究所，武汉，430074) 摘 要 以工程仿真机(NPA2000)软硬件配置系统为基础, 以蒸汽发生 器动态特性研究为核心, 建立蒸汽发生器综合试验台架的全仿真模 型。配合台架热态调试和试验, 开展各种全数字仿真试验, 包括对 台架试验进行仿真预演, 验证稳态试验参数和动态热工水力过程, 预测意外工况下台架运行行为, 研究应急措施等等。通过实测数据 与仿真数据的比较, 验证和改进仿真模型, 不断提高仿真逼真度。 最后, 利用经过校验的仿真试验系统, 对各种台架本身难以进行的 事故或破坏性工况进行数字仿真预测, 形成实物蒸汽发生器综合试 验台架的补充。 1 Digital Simulation Test System for Steam Generator Multi-Purpose Thermalhydraulic Test Facility (In Chinese) YAO Yong (Research Institute of Nuclear Power Operation, Wuhan, 430074) ABSTRACT Taking advantage of NPA2000s software and hardware environment. This project was to develop a full scope digital simulation system of Steam Generator Thermalhydraulic Test Facility. The research work on steam generator was done, including verifying steady state parameters and transient thermalhydraulic processes in advance, predicting the operation scenarios under the incidental conditions and studying the emergency acts, etc. On the other hand, the real test recorded data could greatly help modify and improv