BD-023A2重复性和再现性分析报告.xlsVIP

Analysis Report Graph Data Title 1. A1 2. A2 3. A3 4. Xa= 5. Ra= 6. B1 7. 8. B3 9. Xb= 10. Rb= 11. C1 12. C2 13. C3 14. Xc= 15. Rc= 16. 17. R= 18. XDIFF 19. UCLR 20. LCLR 100 [ EV / TV ] EV K1 100 [ / ] ％ ％AV 100 [ AV / TV ] AV K2 K3 ％PV 100 [ PV / TV ] PV = TV [ Ra= +Rb= +Rc= ]= [MaxX = -Min X= [R= *D4= *D3= [X= +A2= -A2= × B2 X= RP = ]=XDIFF ]=UCLR ]=LCLR 21 ×R= ]=UCLX UCLX 22 ]=LCLX LCLX n D4 D3 A2 ※ ※ + ) ％GRR 1.41 [ PV / GRR ] 1.41[ GRR 100 [ GRR / TV ] ndc ％EV Equipment： Trials Part Average Range Actuation Process Analysis Repeatability---EV: Part No. Trial n = Part No. r = Trials Operator A: Operator B: Operator C: Operator No. Total Variation--TV: ％ Process Variation Reproducibility---AV： Gage Repeatability＆Reproducibility(GRR)： Part Variation--PV: Part Average (XP) Operator A Operator B Operator C Operator/ ]/[Operator= Note：when trial is two D4=3.27，when trial is three D4=2.58 ％R＆R values less than 30% is acceptable Repeatability and Reproducibility Analysis Report Graph Analysis： Graph 1:Ranges of 3 appraisers are within CLR and there is O range and no continuous trend of ascend and descend,which shows that the measurement system has good reproducibility of appraiser and measure equipment. Graph 3:The 3 appraisers measurer data lines interlace,which shows measurer and sample impact with each other,but not heavily. Data Analysis： Result： The System is Acceptable ! Measurement System Analysis Report Repeatability---EV: ％EV = Reproducibility---AV： ％AV = Gage Repeatability＆Reproducibility(GRR)： ％GRR= Part Variation--PV: ％PV = Number of Distinct Categorise ndc= Specification: 0--150mm vernier caliper 0～150mm 0.02mm Part Name: Split pin holes Equipment: vernier caliper Equipment No: Checked Drafted Liu xiang Jin BD-0022A1 Split pin holes Graph2:The p