自动车库门设计-毕业设计.docxVIP

学生：XXX  自动车库门设计 指导教师：XXX 内容摘要：车库门主要有遥控、感应、电动、手动几种。  其中遥控、感应、电动都可统称为自 动车库门。手动车库门和自动车库门主要区别是没有电机，而车库门自动开闭装置，其特征在于有 设置车库内与车库外的主控制器，主控制器有单片机,315M 无线接收器，解码器，键盘，数码管和 红外对管组成，密码标识器由无线发射器和编码器。PT2262 与 PT2272 地址和数据状态一样， PT2262 电源端平时断开，若快到了车库门则按下按钮通电，编码器 PT2262 将地址和数据通过无线 发射模块发射，同时无线接受器的输出端接解码器输入端，解码器的输出端 VT 接单片机的 P3.3, 单片机动态扫描键盘，若数据完全正确的情况下单片机控制电机启动车库门，否则蜂鸣器报警，同 时红外管对管感应次数计数，出车库门后门自动下降，也可以通过按钮屏蔽红外对管，实现手动放 下车库门。之后取车时通过输入密码控制电机启动开门。本设计有利于车库门的国产化，也降低了 生产成本。 关键词：电子密码锁  单片机 无线收发模块 PT2262/PT2272 编解码芯片  红外对管 I Abstract:  Design of automatic garage door The door drives a garage voluntarily to shut a device , whose characteristic lies in the host controller who has interposing the garage inner and the garage outside , the host controller has monolithic machine , 315 wireless receivers of M , decoders , keyboards , the numerical code is in charge of and infrared pair of tube made up of , password mark the wireless implement reason emitter and the coder. PT2262 andPT2272 address are same as data state , the PT2262 power source holds the disconnection the ordinary time , press down the button circular telegram if having arrived at the garage door quickly, coder PT2262 launches address and the data by wireless go off module , at the same time wireless receiver output end takes over the decoder input end , decoder output end VT receives monolithic machine P3.3 , garage inner monolithic machine opens the garage door if the data is absolutely correct , the at the same time infrared tube is in charge of induced number of times counting face to face , put up garage door back door automation go down, Also can pass the button shield infrared realize hand movement to, laying down the garage door. The garage door can not open up if data-in is incorrect , buzz alarm warning prompts and. The starting controlling an electric motor by importing a password when fetching vehicle afterwards opens the door. Keywords:  Electronic lock single-chip wireless transceiver module PT2262/PT2272 Code decode