流程图,失效模式分析,控制计划.pptVIP

Process Planning, Analysis, Control (PFD-PFMEA-PCP) 2005 Delphi Corporation, Course Number CTIS #30513 - Version 6 Notes pages Page * State: The FMEA team reviews the current or intended process controls to decide which will apply to the failure mode and cause / mechanism. Control and tools include: Control or measurement of the Process. Measurement or testing of the product. Set-up verification, “cannot-use” type error-proofing, over-temperature alarm and in-station error-proofing will detect process problems or a bad part. Dimensional, electrical, functional and burn-in testing will