阀体模具设计.pdfVIP

摘 要 本文内容为阀体的注塑模设计， 用塑料注射成型完成， 因为塑料注射成型到 目前已成为热塑性塑料成型的一种重要方法， 随着现在科技的进步注塑模的应用 也越来越普遍，注塑模的生产要求也越来越高，现在应用 CAD 或者 CAM 等软 件，使得注塑模生产变得越来越容易， 生产的质量也越来越高。 做出来的塑件也 越来越好。它具有成型周期短、能一次性成型复杂、尺寸精度高、带有金属或非 金属嵌件的塑料制件。 本设计是对阀体塑件进行设计， 由于该塑件精度要求比较高， 且该塑件体积 小、塑件上有凸缘需要用到滑块和侧抽芯结构， 所以对模具的设计和加工都有较 高的要求。 本设计对模具的各个部分都做了分析， 并用 pro/e 进行了建模、 计算， 运用 CAD 制出工程图，使得模具更加完善。 关键词： 阀体；注塑模；模具设计；滑块；侧抽芯 Abstract This paper says the body of the deep cavity plastic parts the injection mold design, becauseplastic injection molding to the current thermoplastic molding has become an important method, as more and more widespread application of technological advances in the injection moldproduction, injection mold requirements are getting higher and higher, CAD or CAM software, making the production of injection mold has become increasingly easy to increasingly high production quality. Made out of plastic parts. It has molding cycle short, one-time molding can be complex, size, high precision, with A metal or non-metallic inserts of plastic parts. The design is to design the body of the deep cavity plastic parts, plastic parts precision is relatively high, and the plastic parts, small size, the plastic parts on the flange need to use the structure of the slider and side core pulling, so the mold design and processing have higher requirements. Various parts of the mold, the design analysis, using pro/e modeling, computing, the use of CAD system the drawings. More perfect mold. Key words: deep cavity body；injection mold ；Mold Design ；slider；side core pulling 1 绪论 1.1 国内外发展状况 1.1.1 模具工业的概况 模具是现代工业，特别是汽车、无线电、航空、电机电器、仪器、仪表、兵 器、日用品等工业必不可少的工艺装备。据统计， 75%的粗加工工业