c500-98中文版-石棉水泥管的标准试验方法.docVIP

C 500 PAGE 332 Designation: C 500 – 98 编号：C 500 – 98 PAGE 323 Standard Test Methods for Asbestos-Cement Pipe These test methods are under the jurisdiction of ASTM Committee C-17 on Fiber-Reinforced Cement Products and are the direct responsibility of Subcommittee C 17.03 on Asbestos-Cement Sheet Products and Accessories.本规范由ASTM委员会 These test methods are under the jurisdiction of ASTM Committee C-17 on Fiber-Reinforced Cement Products and are the direct responsibility of Subcommittee C 17.03 on Asbestos-Cement Sheet Products and Accessories.本规范由ASTM委员会C-17纤维增强水泥制品委员会管辖，并由C17.03石棉水泥薄板制品和附件分委会直接负责。Current edition approved Aug. 10, 1998. Published March 1999. Originally published as C 500 - 63 T. Last previous edition C 500 - 91(1995) ε1.现行版本于1998年8月10日批准，并于1999年3月出版。最初版本编号为C500-63T，上一版本编号为C500-91（1995）ε1。 This standard is issued under the fixed designation C 500; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 500刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 These test methods cover the testing of asbestos-cement pipe for hydrostatic strength, flexural strength, crushing strength, straightness, and uncombined calcium hydroxide; they are for use in conjunction with the individual product specifications for asbestos-cement pipe.本试验方法涵盖了石棉水泥管的流体静压力强度、抗弯强度、抗碎强度、平直度和游离氢氧化钙的试验；试验方法应与石棉水泥管的个别生产规范联合使用。 Test methods appear in the following sections:试验方法出现在以下的各章节中： Section 章节 Hydrostatic Pressure Test流体静压力试验 4 Flexural Test 抗弯试验 5 Crushing Test 压碎试验 6 Straightness Test 平直度试验 7 Uncombined Calcium Hydroxide Test 游离氢氧化钙试验 8 Guidelines for internal and external corrosion included in Section 9 serve as an aid in determining the type of pipe which should be specif